flange bolt造句

• Hexagon flange bolts - heavy series - product grade b
  六角法兰面螺栓加大系列细杆b级
• Hexagon flange bolts
  六角法兰螺栓
• 10 , 000 pieces of m8 flange bolts in joint development with a steel manufacturer and a forging facility manufacturer
  加工实绩： m8法兰螺丝约1万个冷间锻造加工成功跟钢铁厂及锻造设备厂共同开发
• Position the assembly onto the mating flange and install all flange bolts , being sure to remove positioning sleeves ( fig . 3f )
  将总成放置在配套法兰上，并安装所有法兰螺栓，确保拆卸定位衬套（图3f ） 。
• Before any flange bolts are tightened , valves should be centered within the flanges and then carefully opened to assure free , unobstructed disc movement
  在紧固阀门螺栓之前，阀门应该处于法兰之间的中心位置，然后小心打开，以确保阀瓣能够灵活、无障碍的运动。
• 1 , screw down the flange bolt regularly and the tightness of all bolts shall be same as soon as possible . under bad conditions , flat pad as well as spring gadket shall be installed to prevent the nut loosening
  1法兰螺栓应逐步均匀地加压拧紧，所有螺栓松紧度尽可能一致。使用条件恶劣的场合，除加平垫外可添加弹簧垫圈，以防螺母松动。